With the FreeFlo Wireless Remote, you have the ability to maneuver and power your FreeFlo tubes with the greatest of ease. Our handy remote is set conveniently in the handle for easy access and reach, or can detach to go wherever you go! With no wires, you have complete freedom. You can move however you’d like without worrying about wire snags. It’s good to be free! Best yet, the compact and weather-tight receiver and transmitter can be used to control almost any 12V function up to 5 amps! Set it to control actuators, solenoid valves, throttle control motors or whatever you need! Our easy-to-operate buttons and compact design keep things simple with no need to deal with those pesky wires anymore. Installation is easy, too. The install kit comes complete with everything you need. Latching functions consist of two buttons. When the 'Start' button is pressed, 12V power is supplied to one of the outputs and is "latched" on until the 'Stop' button is pressed. Momentary functions consist of one button on the transmitter. Power is supplied to one of the outputs only when the corresponding transmitter button is pressed and held.